![]() ![]() In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.Īt the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. UASP is supported in Windows® 8, 8.1, Server 2012 and Linux kernel 2.6.37 or later. The PCIe USB 3.0 adapter is compliant with USB 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB 2.0 / 1.1 devices.įor added versatility, the controller card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers. See our UASP test results below for further details. Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. ![]() The PEXUSB3S24 2-Port PCI Express USB 3.0 Card lets you add two USB 3.0 ports to your PCI Express-enabled computer system, with an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.0 bus-powered devices (500mA for USB 2.0).Įnhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note:UASP is not supported by all operating systems). I don't know if there are any PCIe capture cards that are both at similar price points and compatible with GNU/Linux.Product description Startech 2 Port PCIe USB 3.0 Card Adapter w/ UASP Usb pcie usb 3 card Pc#Then there are the TNP UH60 and AVermedia BU110, which are more expensive but lack an HDMI output which means I would have to use an HDMI splitter from the source device such as my gaming PC and console. The Y&H Ezcap261-CA and axGear are the cheapest capture cards that are advertised to work with Linux. ![]() I'd also want to run Ubuntu in the streaming PC, rather than Windows, so I'd have to get a capture card that is compatible with GNU/Linux as well as Windows and Mac OS. Usb pcie usb 3 card pro#If I wanted to stream in 4K, then of course I'd get a high-end PCIe capture card like the Elgato 4K60 Pro along with a better CPU and motherboard, preferably one with at least two PCIe x16 connectors. Usb pcie usb 3 card plus#If I go USB 3.0, such as the Elgato HD60 S, I wouldn't need to use a different video card, plus it would be cheaper for me. The ZOTAC GT 1030 card would work just fine for the streaming PC alongside a PCIe capture card, because it uses up only one PCI slot and consumes less energy than my GTX 960. If I go for PCIe, such as the Elgato HD60 Pro, I'd have to get a different video card, one that takes up only one PCI slot, because on my motherboard, the PCIe x1 connector is just one slot below the PCIe x16, and my GTX 960 takes up two slots, covering the PCIe x1. ![]() I heard that PCIe capture cards are more stable than USB capture cards. Problem is choosing a capture card for it. Memory: Corsair Vengeance Pro 16GB (2x8GB) DDR3 2400 Motherboard: msi 760GMA-P34 (FX) Micro-ATX AM3+ Motherboard I plan on building a streaming PC using some of my old gaming PC hardware that I'm currently not using: ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |